Part Number Hot Search : 
200V1 NTE150 WT8801 AV2816A DCT0603 3TK283 CQX15 1SS15407
Product Description
Full Text Search
 

To Download 74F381 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 74F381 4-Bit Arithmetic Logic Unit
May 1988 Revised October 2000
74F381 4-Bit Arithmetic Logic Unit
General Description
The 74F381 performs three arithmetic and three logic operations on two 4-bit words, A and B. Two additional select input codes force the function outputs LOW or HIGH. Carry propagate and generate outputs are provided for use with the 74F182 carry lookahead generator for high-speed expansion to longer word lengths. For ripple expansion, refer to the 74F382 ALU data sheet.
Features
s Low input loading minimizes drive requirements s Performs six arithmetic and logic functions s Selectable LOW (clear) and HIGH (preset) functions s Carry generate and propagate outputs for use with carry lookahead generator
Ordering Code:
Order Number 74F381SC 74F381SJ 74F381PC Package Number M20B M20D N20A Package Description 20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300 Wide 20-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide 20-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide
Devices also available in Tape and Reel. Specify by appending the suffix letter "X" to the ordering code.
Logic Symbols
Connection Diagram
IEEE/IEC
(c) 2000 Fairchild Semiconductor Corporation
DS009528
www.fairchildsemi.com
74F381
Unit Loading/Fan Out
Pin Names A0-A3 B0-B3 S0-S2 Cn G P F0-F3 Description A Operand Inputs B Operand Inputs Function Select Inputs Carry Input Carry Generate Output (Active LOW) Carry Propagate Output (Active LOW) Function Outputs U.L. HIGH/LOW 1.0/3.0 1.0/3.0 1.0/1.0 1.0/4.0 50/33.3 50/33.3 50/33.3 Input IIH/IIL Output IOH/IOL 20 A/-1.8 mA 20 A/-1.8 mA 20 A/-0.6 mA 20 A/-2.4 mA
-1 mA/20 mA -1 mA/20 mA -1 mA/20 mA
Functional Description
Signals applied to the Select inputs S0-S2 determine the mode of operation, as indicated in the Function Select Table. An extensive listing of input and output levels is shown in the Truth Table. The circuit performs the arithmetic functions for either active HIGH or active LOW operands, with output levels in the same convention. In the Subtract operating modes, it is necessary to force a carry (HIGH for active HIGH operands, LOW for active LOW operands) into the Cn input of the least significant package. The Carry Generate (G) and Carry Propagate (P) outputs supply input signals to the 74F182 carry lookahead generator for expansion to longer word length, as shown in Figure 2. Note that an 74F382 ALU is used for the most significant package. Typical delays for Figure 2 are given in Figure 1.
Function Select Table
Select S0 L H L H L H L H
H = HIGH Voltage Level L = LOW Voltage Level
S1 L L H H L L H H
S2 L L L L H H H H
Operation Clear B Minus A A Minus B A Plus B AB A+B AB Preset
Toward Path Segment Ai or Bi to P Pi to Cn + ('F182) Cn to F Cn or Cn + 4, OVR Total Delay F 7.2 ns 6.2 ns 8.1 ns -- 21.5 ns
Output Cn + 4, OVR 7.2 ns 6.2 ns -- 8.0 ns 21.4 ns
FIGURE 1. 16-Bit Delay Tabulation
FIGURE 2. 16-Bit Lookahead Carry ALU Expansion
www.fairchildsemi.com
2
74F381
Truth Table
Inputs Function CLEAR S0 L S1 L S2 L Cn X L L L B Minus A H L L L H H H H L L L A Minus B L H L L H H H H L L L A Plus B H H L L H H H H X X AB L L H X X X X A+B H L H X X X X AB L H H X X X X PRESET
H = HIGH Voltage Level L = LOW Voltage Level X = Immaterial
Outputs An X L L H H L L H H L L H H L L H H L L H H L L H H L L H H L L H H L L H H L L H H Bn X L H L H L H L H L H L H L H L H L H L H L H L H L H L H L H L H L H L H L H L H F0 L H L L H L H H L H L L H L H H L L H H L H L L H L H H L L H H H L L L H H H H H F1 L H H L H L H L L H L H H L L H L L H H H L L L H L H H L L H H H L L L H H H H H F2 L H H L H L H L L H L H H L L H L L H H H L L L H L H H L L H H H L L L H H H H H F3 L H H L H L H L L H L H H L L H L L H H H L L L H L H H L L H H H L L L H H H H H G L H L H H H L H H H H L H H H L H H H H L H H H L H H H L H H H H L H L H H H H H P L L L H L L L H L L H L L L H L L H L L L H L L L H H L L H H H L L H L L H H H L
H
H
H
X X
3
www.fairchildsemi.com
74F381
Logic Diagram
Please note that this diagram is provided only for the understanding of logic operations and should not be used to estimate propagation delays.
www.fairchildsemi.com
4
74F381
Absolute Maximum Ratings(Note 1)
Storage Temperature Ambient Temperature under Bias Junction Temperature under Bias VCC Pin Potential to Ground Pin Input Voltage (Note 2) Input Current (Note 2) Voltage Applied to Output in HIGH State (with VCC = 0V) Standard Output 3-STATE Output Current Applied to Output in LOW State (Max) twice the rated IOL (mA)
-65C to +150C -55C to +125C -55C to +150C -0.5V to +7.0V -0.5V to +7.0V -30 mA to +5.0 mA
Recommended Operating Conditions
Free Air Ambient Temperature Supply Voltage 0C to +70C
+4.5V to +5.5V
-0.5V to VCC -0.5V to +5.5V
Note 1: Absolute maximum ratings are values beyond which the device may be damaged or have its useful life impaired. Functional operation under these conditions is not implied. Note 2: Either voltage limit or current limit is sufficient to protect inputs.
DC Electrical Characteristics
Symbol VIH VIL VCD VOH VOL IIH IBVI ICEX VID IOD IIL Parameter Input HIGH Voltage Input LOW Voltage Input Clamp Diode Voltage Output HIGH Voltage Output LOW Voltage Input HIGH Current Input HIGH Current Breakdown Test Output HIGH Leakage Current Input Leakage Test Output Leakage Circuit Current Input LOW Current 4.75 3.75 -0.6 -1.8 -2.4 IOS ICC Output Short-Circuit Current Power Supply Current -60 59 -150 89 10% VCC 5% VCC 10% VCC 2.5 2.7 0.5 5.0 7.0 50 Min 2.0 0.8 -1.2 Typ Max Units V V V V V A A A V A mA mA mA mA mA Max Max 0.0 0.0 Max Max Max Max Max Min Min Min VCC Conditions Recognized as a HIGH Signal Recognized as a LOW Signal IIN = -18 mA IOH = -1 mA IOH = -1 mA IOL = 20 mA VIN = 2.7V VIN = 7.0V VOUT = VCC IID = 1.9 A All Other Pins Grounded VIOD = 150 mV All Other Pins Grounded VIN = 0.5V (Sn) VIN = 0.5V (An, Bn) VIN = 0.5V (Cn) VOUT = 0V
5
www.fairchildsemi.com
74F381
AC Electrical Characteristics
TA = +25C Symbol Parameter Min tPLH tPHL tPLH tPHL tPLH tPHL tPLH tPHL tPLH tPHL tPLH tPHL Propagation Delay Cn to Fi Propagation Delay Any A or B to Any F Propagation Delay Si to Fi Propagation Delay Ai or Bi to G Propagation Delay Ai or Bi to P Propagation Delay Si to G or P 2.5 2.5 4.0 3.5 4.5 4.0 3.5 3.5 2.5 3.5 4.0 4.5 VCC = +5.0V CL = 50 pF Typ 8.1 5.7 10.4 8.2 8.3 8.2 6.4 6.8 7.2 6.5 7.8 10.2 Max 12.0 8.0 15.0 11.0 20.5 15.0 10.0 10.0 10.5 9.5 12.0 13.5 TA = 0C to +70C VCC = +5.0V CL = 50 pF Min 2.5 2.5 4.0 3.5 4.5 4.0 3.5 3.0 2.5 3.5 4.0 4.5 Max 13.0 9.0 16.0 12.0 21.5 16.0 11.0 11.0 11.5 10.5 13.0 14.5 ns ns ns ns ns ns Units
www.fairchildsemi.com
6
74F381
Physical Dimensions inches (millimeters) unless otherwise noted
20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300 Wide Package Number M20B
7
www.fairchildsemi.com
74F381
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
20-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide Package Number M20D
www.fairchildsemi.com
8
74F381 4-Bit Arithmetic Logic Unit
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
20-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide Package Number N20A
Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. 9 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com
www.fairchildsemi.com


▲Up To Search▲   

 
Price & Availability of 74F381

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X